evilsprig Posted June 18, 2006 Share Posted June 18, 2006 Does anyone use this? I just got some to try, and am burning some testers now. I (naively) assumed that my trusty 36-24-24z wicks would work well, but they are struggling. I wicked up to a 44-24-18 z and also a 44-32-18z. The 44-24 is still struggling, and the 44-32 is a little slow. However, even with the sluggish burn the scent throw seems to be very good. Any wick sugggestions on this wax? TIA! Quote Link to comment Share on other sites More sharing options...
Kaybee23 Posted June 18, 2006 Share Posted June 18, 2006 Palm needs a very hot wick to burn it and zincs are the coolest burning of the wicks, so you are not going to get a good burn with zincs. I had good luck with HTP's in mine.....here is another thread with some other ideas. Also, if you do a search, you will likely find even more. http://www.candletech.com/forums/showthread.php?t=25652&highlight=wick+palm Quote Link to comment Share on other sites More sharing options...
gingerinarkansas Posted June 18, 2006 Share Posted June 18, 2006 Hi Evilsprig, I use astorlite v and most of the time use cd-5 wicks with an occasional wicking up using cd-6 or 44-24-18z. I never had much luck with the 36z wicks; they just never had enough umph to them. Ginger Quote Link to comment Share on other sites More sharing options...
Linnyeg Posted June 18, 2006 Share Posted June 18, 2006 Back when I used V, I found that 36-24-24 C worked well (it burns hotter than the zinc) Quote Link to comment Share on other sites More sharing options...
von691 Posted June 18, 2006 Share Posted June 18, 2006 I use 44-24 z in my votives and have no problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.