MsDammit Posted June 25, 2006 Share Posted June 25, 2006 Here is my nasty ass attempt at MP. After the billionth try, I've figured out a few of my many mistakes- I know I pour too quick (I'm just too impatient cuz I never can wait long enough), and Wilson colors bleed everytime. I spray with alcohol on the bottom of the mold, between layers, and on the top-but what I haven't figured out is why when I tested a few of the bars- the damn layers separate within minutes and the whole stinkin bar falls apart before my eyes-grrrr. Quote Link to comment Share on other sites More sharing options...
Brenda Posted June 25, 2006 Share Posted June 25, 2006 I've never done MP, so have no tips about the falling apart of the layers. But I do like the look of that bar! Quote Link to comment Share on other sites More sharing options...
Tara Posted June 25, 2006 Share Posted June 25, 2006 I think it looks nice. Very colorful Quote Link to comment Share on other sites More sharing options...
elitenaildesign Posted June 25, 2006 Share Posted June 25, 2006 My bars seperated too and they WERE so cool looking. That is frustrating. I forgot to use alcohol between layers, but since you did, maybe there isnt any hope for me. I want to do layers for the summer swap. Quote Link to comment Share on other sites More sharing options...
MsDammit Posted June 25, 2006 Author Share Posted June 25, 2006 I just tried re-melting a bar of it and eww it was a puke green color, lol. Quote Link to comment Share on other sites More sharing options...
hawaiiansun Posted June 25, 2006 Share Posted June 25, 2006 How long did you wait between layers? I usually wait about 30 - 45 minutes, spritz then pour and I haven't had any seperation of layers. LOL @ puke green, I had that also yesterday. Keep at it, the first one looked ok. Quote Link to comment Share on other sites More sharing options...
Luci Posted June 25, 2006 Share Posted June 25, 2006 The pic isn't clear for me. I know what you mean about the layers. I also followed the rules, but the layers still separated. I gave up on trying layers. Quote Link to comment Share on other sites More sharing options...
MsDammit Posted June 25, 2006 Author Share Posted June 25, 2006 How long did you wait between layers? I usually wait about 30 - 45 minutes, spritz then pour and I haven't had any seperation of layers. I waited about 2 hrs for the first layer, poured and went to bed in a rotten mood when I saw the colors bleeding (looked like a mushy mess) and then the next morning I figured what the hell and poured the last layer. Hats off to all of you that post such pretty MP pics, cuz my patience is gone, lol. Quote Link to comment Share on other sites More sharing options...
Darwin Posted June 25, 2006 Share Posted June 25, 2006 Hmm, I have yet to make layers, so when I do I will have to try the spritz thing! I have done embeds before and I do know if you pour to hot, that will cause the embeds to bleed. I usually let the MP cool until a very thin layer of film forms over the top, then I pour over my embeds. Quote Link to comment Share on other sites More sharing options...
prairieannie Posted June 25, 2006 Share Posted June 25, 2006 For the record, I think the posted pic looks delighful!! Quote Link to comment Share on other sites More sharing options...
Grumpy Girl Posted June 25, 2006 Share Posted June 25, 2006 I think they are good soapies. On the layers, just let them cool enough to skin over and yet firm enough to support another layer without falling in, spritz with alcohol and pour.The Wilton colors will bleed, but they're a blast to play with. I think BCN or WSP sells non-migrating/bleeding MP colors. I've had good luck with select shades in MP so far, but I haven't done anything elaborate with them yet. Quote Link to comment Share on other sites More sharing options...
soapmom25 Posted June 26, 2006 Share Posted June 26, 2006 when I layer stuff it only separates if I made a log and cut it. If I layer within a mold and leave that soap as 1 piece then they don't separate when used. Hence ~ I quit making logs M&P is most "fun" when you use decorative mold IMO. Most of my stuff is bought for the way it looks, not actually to be used LOL. Quote Link to comment Share on other sites More sharing options...
CDGM Posted June 26, 2006 Share Posted June 26, 2006 Dont give up! The layering will get easier! I did a big half round mold in layers and I could cut one and it would stick fine the next one would break apart. Take your broken parts chop them up and use as embeds! Or remelt them and use them to practice the timing on the layers, that way you dont go thru all your soap!The Wiltons not only bleed in M&P they fade too... ask me how I know that! Quote Link to comment Share on other sites More sharing options...
Noodle Posted June 26, 2006 Share Posted June 26, 2006 First, the soap that you made is great looking. Next, you have to pour your layers relatively quick. I have found that the cooler the layers are, the more likely it is that separation will occur. Quote Link to comment Share on other sites More sharing options...
pamperme Posted June 26, 2006 Share Posted June 26, 2006 On the layers, just let them cool enough to skin over and yet firm enough to support another layer without falling in, spritz with alcohol and pour.That is what I do as well..have only had one instance of separation and that is cause I was trying to shove a bar of soap into a cello bag that barely fit..and I banged it around alot. ..so I used it myself.Also just like a candle I try to pour the second layer just bit hotter than the first one. Quote Link to comment Share on other sites More sharing options...
MsDammit Posted June 27, 2006 Author Share Posted June 27, 2006 Well I think these bars are going to visit the trash can-grrrrrrr. They are SLIMY!! I keep wiping them off and still they ooz-ack. I mean if u pick a bar up it will slip right outta your hand. I've tried stickin em in front of a fan, under the A/C-I just threw em in the fridge on my way out this morning. Oh and besides being so slimy-it gets coated with like a crystalized white look-hard to explain, I am just so disgusted with this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.