Paulette Posted August 20, 2006 Share Posted August 20, 2006 What type of mold did you use for your first batch?. wood mold? and what size ? I have ordered my scale, lye, and some other things but I have to get a mold yet. Then I will be ready to try my first batch. May need someone to guide me thru the first time. thanks Quote Link to comment Share on other sites More sharing options...
dee263 Posted August 20, 2006 Share Posted August 20, 2006 When I first started making soap I did HP because I couldn't imagine waiting another 4 weeks to see if it really worked, lol. For that I used 12" peices of PVC downspout from Lowe's. (you could use that for CP as well, just be sure one end is sealed very well with plastic wrap and duct tape) By the time I decided to try CP, I had bought wooden molds. There are lots of things you can use though. Rubbermaid drawer inserts/separaters from the supermarket work well. I use the square ones for test batches. I even use the bottom of half-gallon plastic milk cartons to make very small, highly colored batches. I then shave those down and add the shavings to an uncolored batch to make it more interesting. There are many things that you can use for a mold today rather than waiting to order one. Good luck with your CP!! Quote Link to comment Share on other sites More sharing options...
CareBear Posted August 20, 2006 Share Posted August 20, 2006 I think my first mold was a drawer organizer. I graduated to a shoe box lid next for a make-shift slab mold, and then used the end of a flat flat-rate box for a log mold.Now I have a Misty Creek 18 bar mold. Quote Link to comment Share on other sites More sharing options...
LovelyLathers Posted August 20, 2006 Share Posted August 20, 2006 My first was a drawer organizer also then I went to a shoe box. I now use a log mold. Sue Quote Link to comment Share on other sites More sharing options...
MaryinCary Posted August 20, 2006 Share Posted August 20, 2006 :wave: Nice to see you Paulette~~I was lucky when the bug hit me...EBCandles was selling alot of stuff in the classifieds and picked up a 3# wood log mold from her....havent used anything but that since I started and I now have about 18 batches under my belt!! Welcome to the world of soap lady Quote Link to comment Share on other sites More sharing options...
Misty Posted August 20, 2006 Share Posted August 20, 2006 I started with and still use 8 lb wooden molds. I like the size of bar I end up with. I also found some 4 lb log molds on ebay that are a thick plastic. They were advertised as a no liner mold, but I ended up with 4 lbs of soap stuck in them. Had to cut them out with a knife, and ruined the soap. Now I line them too. Quote Link to comment Share on other sites More sharing options...
tonyalc Posted August 20, 2006 Share Posted August 20, 2006 My first soap mold was a plastic, oblong bowl that I've had for years. It worked great but the corners of all my soaps were rather curvy. I've also used a Pringles can a few times and cardboard boxes (lined, of course). Quote Link to comment Share on other sites More sharing options...
sudsnwicks Posted August 20, 2006 Share Posted August 20, 2006 I started with milky way molds. They are slab molds which hold 2 lbs of soap and the surface is scored, so once you take out your soap, you can just cut along the lines. But like the others said, you can easily find household items to use as a mold without specially buying one. Quote Link to comment Share on other sites More sharing options...
Carrie Posted August 20, 2006 Share Posted August 20, 2006 My first soap was made in a jewelry box. It was 3 inches wide and 2 inches high. Just the right size. I bought them at the craft store, just unfinished jewelry boxes ready to decorate. Each one held 1lb and I made a 2lb batch.First Batch Quote Link to comment Share on other sites More sharing options...
Scented Posted August 20, 2006 Share Posted August 20, 2006 Hey Paulette!!Leslie set me up with a kit that would make something like 2 batches. She also included one of those wooden 3 lb molds from Target, but I've seen Bunny make soap in anything since then. We've also gotten other wooden molds. I guess I like woodies Quote Link to comment Share on other sites More sharing options...
Linnyeg Posted August 20, 2006 Share Posted August 20, 2006 I made my first batch in a 3lb log mold that I had made for me. Quote Link to comment Share on other sites More sharing options...
Jcandleattic Posted August 20, 2006 Share Posted August 20, 2006 When I finally decided to make my cp after many months of reading (lol) I actually bought a kit online that had everything included with the exception of the lye. I don't think that place is in business anymore, but it came with a little 3lb wooden mold, 4 oils (enough to make at least 2 batches of soap), 4oz of soap safe FO and a booklet of instructions with about 15 recipes as well. All for about $30.00!! It was a steal, and I wish the place was still in business. I still have that mold and I still use some of the recipes. Everything else is long gone! lol Anyway, to answer your question (sorry, I got a little side tracked) for me it was easier to start with a wooden log mold. After I got the hang of what I was doing, and the feel for it, I use many different molds. Whatever you decide, good luck and have fun. Quote Link to comment Share on other sites More sharing options...
Crafty1_AJ Posted August 20, 2006 Share Posted August 20, 2006 I used an empty baby butt wipe container for my very first soap mold. Quote Link to comment Share on other sites More sharing options...
Brenda Posted August 20, 2006 Share Posted August 20, 2006 Made my first few batches in a series of shoe boxes. Then finally bought two log molds on eBay and finally settled on a couple of large slab molds. I am using the log molds again once in a while, but thank goodness I'll never have to use a shoe box again! Quote Link to comment Share on other sites More sharing options...
Shani Posted August 21, 2006 Share Posted August 21, 2006 Let me tell you, my first few batches were hideous! I started soaping in 2000 learning from reading books and manually calculating lye needed for each batch. But once my common sense kicked in:grin2: and I realized what I was doing, I poured my first batch into a tupperware container; then graduated to a shoe box! ( I remember distinctively, it was a Nine West, size 8 1/2 shoe box lined with parchment paper and I thought I was the sh*t!) At the time I didn't know forums like this existed! If i would've known, I would have used a wooden mold! Quote Link to comment Share on other sites More sharing options...
CaliZona Posted August 21, 2006 Share Posted August 21, 2006 I started with a cardboard box. I lined it with contact paper for easy clean up, but still use freezer paper liner against the soap. Worked like a charm. I still use it when I want to make a log shaped soap. Quote Link to comment Share on other sites More sharing options...
lindsaycb Posted August 21, 2006 Share Posted August 21, 2006 I started with HP in rubbermaid drawer organizers. Then I had the DH make me some 4lb wooden molds. I've always lined with trashbags...I have zero patience to crease & fold freezer paper Quote Link to comment Share on other sites More sharing options...
Paulette Posted August 21, 2006 Author Share Posted August 21, 2006 Thanks for all the replys. I think I will order me a wooden log mold to start with. Just seems easier for me. I hope everything will be in by the weekend.Thanks again. Quote Link to comment Share on other sites More sharing options...
Meridith Posted August 22, 2006 Share Posted August 22, 2006 My first batch of soap I made in a plastic tray mold that I got with a kit from TDF. I made a 5lb batch of soap!! I then bought a small wood log mold and liked it so much I bought an even bigger one. I now use my Kelsie mold and just love it. Quote Link to comment Share on other sites More sharing options...
azure68 Posted August 22, 2006 Share Posted August 22, 2006 My first batch of CP was made in a Rubbermaid drawer organizer. I used the larger rectangular one and used 2 lbs. of oils. I lined with freezer paper, but was a PITA because of the slightly slanted sides of the drawer organizer. Quote Link to comment Share on other sites More sharing options...
eugenia Posted August 22, 2006 Share Posted August 22, 2006 I think my first mold was a drawer organizer. I graduated to a shoe box lid next for a make-shift slab mold, and then used the end of a flat flat-rate box for a log mold.Now I have a Misty Creek 18 bar mold.This just struck me as so funny! It's been what, 2 mos at the most? You should be able to remember back that far with no problem. Quote Link to comment Share on other sites More sharing options...
CareBear Posted August 22, 2006 Share Posted August 22, 2006 This just struck me as so funny! It's been what, 2 mos at the most? You should be able to remember back that far with no problem.I remember what I used, I just am not sure what the thing was designed to be - it was just something I found in the basement when I moved in here! I think it was a drawer organizer but it could have been for something completely different like a funky modern olive dish or something! Who knows! LOL Quote Link to comment Share on other sites More sharing options...
donna4909 Posted August 23, 2006 Share Posted August 23, 2006 I also found some 4 lb log molds on ebay that are a thick plastic. They were advertised as a no liner mold, but I ended up with 4 lbs of soap stuck in them. Had to cut them out with a knife, and ruined the soap.I have the same problem. I'm hoping spraying them with Pam will work. It's odd though, because my first couple of batches in them didn't stick.And I started CP with a wooden box from the Wal-Mart craft section. Quote Link to comment Share on other sites More sharing options...
CareBear Posted August 23, 2006 Share Posted August 23, 2006 I would recommend mineral oil over Pam - some say the Pam saponifies - it's just another vegetable oil after all. All I know is that mineral oil works better for me. I get it in the pharmacy area of the grocery store - near the laxatives! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.