billyne Posted December 15, 2006 Share Posted December 15, 2006 in your containers -- i was reading on another message board and this lady was saying that she uses a glue gun, do alot of people do this? was just being nosey :rolleyes2 Quote Link to comment Share on other sites More sharing options...
Gravity Posted December 15, 2006 Share Posted December 15, 2006 Well, using a high-temp glue gun would be a way of attaching them... not sure how the glue gun would aid in centering them, however. Quote Link to comment Share on other sites More sharing options...
Crafty1_AJ Posted December 15, 2006 Share Posted December 15, 2006 I center 'em by eyeballing it. And I attach them with wick stickums. Quote Link to comment Share on other sites More sharing options...
lpoitras Posted December 15, 2006 Share Posted December 15, 2006 me too. although I think if I have a big fundraiser again I will definitely get those wick centering plastic "crosses". The only thing is they have to fit the jar so a little homework is required before ordering. I think for a lot of candles at once that will be the way to go. For now I eyeball carefully, then pull them up and make sure they are centered. Don't ask me how many I pull off and do over, I am NUTS about centered wicks. Quote Link to comment Share on other sites More sharing options...
Candle Makin Momma Posted December 15, 2006 Share Posted December 15, 2006 I attached them with wick stickums and center them with clothespins Quote Link to comment Share on other sites More sharing options...
geekrunner Posted December 15, 2006 Share Posted December 15, 2006 There is a company from Texas that makes not only the EZ Wick Setting Tool, but also makes EZ Wick Centering tools. They are not very expensive, and they save you a bunch of time and perfectly center your wicks! I originally purchased a dozen of the small and large size. The small works well for jelly jars, and the large works well for larger jars with 3" openings, and is setup for double wicking. Very handy tools indeed! You can get them from alot of places, but one in particular is Greenleaf in Grand Prairie, TX.//end shameless plug geek Quote Link to comment Share on other sites More sharing options...
gmp Posted December 15, 2006 Share Posted December 15, 2006 Wick centering products, there are lots of choices out there from various suppliers are WELL worth the money, and they are not that expensive to begin with! IMO you want as few variables as possible when making your candles to create a consistent product for friends and customers. I, too, am obsessive about getting the wicks perfectly centered, and these tools take all the guesswork out of it. Quote Link to comment Share on other sites More sharing options...
ChrisR Posted December 15, 2006 Share Posted December 15, 2006 Here's the link to the suppliers that carry the wick centering tool :rolleyes2 http://www.wickcenteringtool.com/default.asp?SID=xB2ENPKN94M6R59GMQG3S5&S=E3&Document=Our+Suppliers&NID=3389992 Quote Link to comment Share on other sites More sharing options...
Carriegsxr6 Posted December 15, 2006 Share Posted December 15, 2006 i attach with a glue gun then use these wooden craft sticks with the notches in them. The notch holds my wick snug. I get them at my dollor store, but i am sure regular craft stores have them too. Quote Link to comment Share on other sites More sharing options...
billyne Posted December 15, 2006 Author Share Posted December 15, 2006 me too. although I think if I have a big fundraiser again I will definitely get those wick centering plastic "crosses". The only thing is they have to fit the jar so a little homework is required before ordering. I think for a lot of candles at once that will be the way to go. For now I eyeball carefully, then pull them up and make sure they are centered. Don't ask me how many I pull off and do over, I am NUTS about centered wicks.i was thinking about trying these too--i'm gonna order these today. Quote Link to comment Share on other sites More sharing options...
billyne Posted December 15, 2006 Author Share Posted December 15, 2006 Here's the link to the suppliers that carry the wick centering tool :rolleyes2 http://www.wickcenteringtool.com/default.asp?SID=xB2ENPKN94M6R59GMQG3S5&S=E3&Document=Our+Suppliers&NID=3389992and i just ordered this too.. thanks! Quote Link to comment Share on other sites More sharing options...
gmp Posted December 15, 2006 Share Posted December 15, 2006 For others interested in this topic here's another tool from BCN. Works well for my mason jars. here's the linkhttp://secure.candlesupply.com/catalog_page_detail.cfm?queries_index=index7&title_bar=Wick%20Center%2FHolder&recordno=15&Product_CatalogID=2570&ProductCodeID=46&ProductSubCodeID=231&NewProduct=0 Quote Link to comment Share on other sites More sharing options...
Raggedy Dani Posted December 15, 2006 Share Posted December 15, 2006 here's how i get mine centered....I make a Template.i draw around the bottom of the jar...on hard cardboard. then i take a rulerand find my center and mark it. take my wick tab and set it on top of the dotand measure all around to exact...and trace around the wick tab.that way i put my jar on top of that template and can see thru the jar and glue my wicks in. it's best way for me to get perfect center.pour my wax in and then use my wick holder to keep them straight up.hope i made sense lolhthDani Quote Link to comment Share on other sites More sharing options...
tamsoycandles Posted December 15, 2006 Share Posted December 15, 2006 I attached them with wick stickums and center them with clothespinsI use the wick stickers from www.thecandlemakersstore.comThen I get all high-tech and use a popsicle stick with a hole drilled in it to help center the wick.Oh, and I also have a "target" that helps center the wick on the bottom. Target with concentric circles and a bulls-eye to aim the wick sticker at. Quote Link to comment Share on other sites More sharing options...
islandgirl Posted December 15, 2006 Share Posted December 15, 2006 I use the EZ Wick Setter and stick-ums. To get them into the jar centered.Then I use the WCT (Wick Centereing Tool) As "THE GEEK" mentioned in a earlier post, to keep those bad boys centered.Both these items save so much time when making large batches. :party: :party: Quote Link to comment Share on other sites More sharing options...
creeksidecandles Posted December 15, 2006 Share Posted December 15, 2006 For those of you ordering the EZ wick centering tool...the white plastic "cross"....they work great, but be warned that if you double wick, you will have to drill 2 additional holes for the two wicks. The ones we got from BCN came with only one hole. Just giving y'all a heads up. Quote Link to comment Share on other sites More sharing options...
Rob in tx Posted December 15, 2006 Share Posted December 15, 2006 creeksidecandles If you ordered the small or the medium they only have one hole. The only Wick Centering Tool for containers that has multiple holes that match the holes on the Multi EZ Wick Setter is the large. If you ordered the Large and received a tool with one hole. Check back with BCN and make sure you ordered the Large. HTHRob in tx Quote Link to comment Share on other sites More sharing options...
Candlebuddy Posted December 15, 2006 Share Posted December 15, 2006 I eye ball mine and then use silicone to attach them. After pouring the wax, I use two popsicle sticks and a clothes pin to hold the wick in place until the wax has hardened. This works great for me. Quote Link to comment Share on other sites More sharing options...
ShelleyBean Posted December 16, 2006 Share Posted December 16, 2006 I use the wick stickers from www.thecandlemakersstore.comThen I get all high-tech and use a popsicle stick with a hole drilled in it to help center the wick.Oh, and I also have a "target" that helps center the wick on the bottom. Target with concentric circles and a bulls-eye to aim the wick sticker at.I'm very glad you posted this idea and pic. I use the plastic cross ones for my 8oz JJ but I have some wedding favors to make in the 1.5 mini hexs and I was thinking now how in the world and I going to keep the wick straight. I was going to use the old standby clothespins but I think I will try this trick :highfive: Quote Link to comment Share on other sites More sharing options...
LynnS Posted December 16, 2006 Share Posted December 16, 2006 Since doing candles in the basement I use wick stickums in warmer weather and glue gun when it is cold.Just look straight down in the jar and have no problem centering.Pour wax and after that pull up/straighten wick and use cut up metal clothes hangers to hold up and center in place.My wicks are very centered doing it this way.Been doing it for 4 years and no problems or complaints from customers. Come to think of it I hope my husband has more hangers at work because needing some more to center the wicks and keep them in place. LynnS Quote Link to comment Share on other sites More sharing options...
Jane42 Posted December 18, 2006 Share Posted December 18, 2006 We double-wick with stickums from BCN, then pull wick through the popsicle stick and secure with tiny clothespins - and I have such a hard time getting them placed just right! It would be no problem if we used a single wick, because the jar has writing in the center, but that would be too easy. :undecided I may just have to buy a myself a EZ Wick Setter for the double wicking! Quote Link to comment Share on other sites More sharing options...
Bev Posted December 18, 2006 Share Posted December 18, 2006 I eyeball mine then use a spring-type clothes pin to keep them centered. I put the wick through the hole, bend it over, and clamp it tight. Quote Link to comment Share on other sites More sharing options...
ragnarock47 Posted December 19, 2006 Share Posted December 19, 2006 Even though I hav eonly made about a dozen container candles so far, I have tried different ways. First was to use two skewers zip/cable tied on one end. It worked ok. I also tried the same held by office clips, the black ones with the silver handles that fold, I think they're called binder clips; they worked ok with the small clips.Today I got some wick holders from WSP, I didn't like 'em one bit:http://www.wholesalesuppliesplus.com/ProductDetail.aspx?ProductID=3708&ProductName=Wick+Holder+for+Jars+%26+Pillars+-+BlackI also tried a straight up black comb, this is the way I'll go, works like a champ to hold the wicks and they're easy to use.All the ways I've done it, I've eyeballed it. I also use a glue gun. Quote Link to comment Share on other sites More sharing options...
SilverOrchid Posted December 19, 2006 Share Posted December 19, 2006 I use a hot glue gun and eyeball them straight, although I think Im going to take someones Idea here and make a template with a bullseye in the middle, we tried wick stickems but they never stay for me, hot glue works everytime! I use metal wick clips to keep them nice and straight while theya re cooling..love them! Quote Link to comment Share on other sites More sharing options...
billyne Posted December 21, 2006 Author Share Posted December 21, 2006 and i just ordered this too.. thanks! i just got the wick centering tool yesterday...and it is the BOMB!! it makes life so much easier...thanks for sharing this! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.