jennifer Posted April 24, 2007 Share Posted April 24, 2007 http://www.candletech.com/forums/showthread.php?t=32466&highlight=pipe+drapeThere was a thread posted a while back where Tess said that a pvc made frame was useless due to the lack of stability. I was wondering if it was the particular design used or if maybe a different design maybe this one would be sturdier? Or do you think it would be help to use metal pipes instead of pvc? I've noticed while searching that the ones that can be rented seem to be made of metal so I was curious what the general thoughts were on this? Quote Link to comment Share on other sites More sharing options...
Trish Posted April 24, 2007 Share Posted April 24, 2007 I'm not Tess, but that frame looks like it will tip over any second. There's no stability at the base, on the bottom corners. You would need something to hold that down, IMO. Quote Link to comment Share on other sites More sharing options...
sockmonkey Posted April 24, 2007 Share Posted April 24, 2007 If you could make the joints at the base a "T" I think it would work better. Quote Link to comment Share on other sites More sharing options...
jennifer Posted April 24, 2007 Author Share Posted April 24, 2007 I'm not Tess, but that frame looks like it will tip over any second. There's no stability at the base, on the bottom corners. You would need something to hold that down, IMO.I understand that this frame while possibly a sturdy frame has no base support and would have something added for the base support what I'm realy wanting to know is if metal pipes instead of pvc pipes would make the overall frame sturdy although still in need of base support...I don't think I'm making much sense unfortunately. Quote Link to comment Share on other sites More sharing options...
Trish Posted April 24, 2007 Share Posted April 24, 2007 The pipe/drape that I used had a heavy square piece that the pipe hooked into for the floor. I think the PVC might work if the drapes aren't very heavy, but it still seems like it would not be as stable.I used to have a PVC clothing rack and that thing was a piece of garbage. It would actually twist and fall.I don't know that I'm helping you with what you need, but my dh was trying to figure out a way to build a pipe/drape set with pvc also since it's lighter weight to carry around. Quote Link to comment Share on other sites More sharing options...
Sherl Posted April 24, 2007 Share Posted April 24, 2007 PVC just does not seem to be as strong, even the sch 40, as pipe. Then adjustability comes in. Booths are not always 10x10. 8' of fabric hanging on them will bow the top a bit unless they are the heavier pvc. Only way to find out is to just do it. Base does need to be more stable than the picture shows.. that looks like it would fall if someone bumps it.. and they will. I spent some time thinking about using pvc and just couldn't design around the issues brought up on here. Quote Link to comment Share on other sites More sharing options...
Tahlula B. Posted April 24, 2007 Share Posted April 24, 2007 For the bottom of the structure, put some concrete in the pipes to act as a weight. Also, it does need something like a T at the bottom to stablize the structure. Quote Link to comment Share on other sites More sharing options...
cowgirl Posted April 24, 2007 Share Posted April 24, 2007 I think I would just rent like trish did. It might be more expensive in the long run but it's just something else you don't have to tote around. JMO Putting up - tearing down.....more time consuming also. plus I am sure your going to be tired after a show anyway and who wants to mess with something else to tear down? Again JMO Quote Link to comment Share on other sites More sharing options...
Candle Man Posted April 24, 2007 Share Posted April 24, 2007 Pipe & Drape systems are metal and come in different widths & heights and either non-adjustable or telescoping. The fabric panals are 100% poloyster and you usually use 3 times the width for a nice gathered look or you can have flat panels.I have made PVC P&D before but had to use 2" pipe because anything less will bow, from the weight of gathered fabric, and you can't go wider than 6' or taller than 10'. You also need large heave bases for the corners like 12" or larger.Here is what a P&D system looks like and a close-up of the bases.BTW - If you know your space will be 10X10 then you could add an extra brace in the center at 5'. Quote Link to comment Share on other sites More sharing options...
jennifer Posted April 26, 2007 Author Share Posted April 26, 2007 I think I would just rent like trish did. It might be more expensive in the long run but it's just something else you don't have to tote around. JMO Putting up - tearing down.....more time consuming also. plus I am sure your going to be tired after a show anyway and who wants to mess with something else to tear down? Again JMORenting would be nice but there really just isn't any where around here. I mean the town I'm in has 3000 people and the next closest town that's larger is a hour away. Quote Link to comment Share on other sites More sharing options...
jennifer Posted April 26, 2007 Author Share Posted April 26, 2007 Pipe & Drape systems are metal and come in different widths & heights and either non-adjustable or telescoping. The fabric panals are 100% poloyster and you usually use 3 times the width for a nice gathered look or you can have flat panels.I have made PVC P&D before but had to use 2" pipe because anything less will bow, from the weight of gathered fabric, and you can't go wider than 6' or taller than 10'. You also need large heave bases for the corners like 12" or larger.Here is what a P&D system looks like and a close-up of the bases.BTW - If you know your space will be 10X10 then you could add an extra brace in the center at 5'.Thanks for the pics and thoughts. I may try to do something if I can find a base of some sort that would work and I completely agree that the center would have to be braced so it would actually be small sections that connect together. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.