Guest LightofDawn Posted June 3, 2008 Share Posted June 3, 2008 Need a little input. The candle below is made with Naturewax C3, Sweet Pea FO and 1/2 Reddig Glo Fuschia Dye Chip. All of the color has been drawn to the top of the candle. This started happening after the first burn and progressively got worse the closer it got to the bottom.Any ideas as to why this happened. ThanksDawn Quote Link to comment Share on other sites More sharing options...
Carriegsxr6 Posted June 4, 2008 Share Posted June 4, 2008 wow, weird. i have never seen that before. i would say its the dye chip. have you colored with any other dyes? Quote Link to comment Share on other sites More sharing options...
kandlekrazy Posted June 5, 2008 Share Posted June 5, 2008 I use C3 and used to color, but I've never seen it before either. Is it possible the heat could be drawing the color up? I'm surprised someone else hasn't jumped in here. Quote Link to comment Share on other sites More sharing options...
Guest LightofDawn Posted June 5, 2008 Share Posted June 5, 2008 I'm surprised someone else hasn't jumped in here.Me too, I was really starting to get a complex. LOLI use dye chips all the time and this is the first time I experienced this. This is also the first time that I have used the color fuschia and I only used a half of a chip because I was trying to get more of a light pink color. I have this candle burning right now in the bathroom and there is almost no color left at all now. Quote Link to comment Share on other sites More sharing options...
gerrie Posted June 5, 2008 Share Posted June 5, 2008 I had something like this happen to me too, and it was with the chips. I use a LOT of chips, but there was only one color I had this problem with. It was years ago, so I don't remember the details, but I'm thinking it was the fuschia, since I never used it again. I thought it was me, cause I never saw anyone post about it, and it was when I first started to make candles, so I blamed most everything that went wrong on "me" . Not positive of the wax, since I tried many, but I started with IGI 2243, so I think that's the wax I was using. Wish I had a better explanation for you. Quote Link to comment Share on other sites More sharing options...
kandlekrazy Posted June 5, 2008 Share Posted June 5, 2008 I'm pouring some breast cancer candles tomorrow so I'll try the fushia dye chip and see what happens. I've never used that color, I usually use the light pink. I've got sweet pea fo too. Quote Link to comment Share on other sites More sharing options...
pwillo2 Posted June 5, 2008 Share Posted June 5, 2008 I had some fuchsia dye chips from CS and mine did the same thing.the picture below is 7% CS Cotton Candy and fuchsia chip in 464Maybe it is the chips!http://i172.photobucket.com/albums/w16/pwillo2/candles/fuschia.jpg Quote Link to comment Share on other sites More sharing options...
JudiGa Posted June 5, 2008 Share Posted June 5, 2008 I am of no help here since I do not use the chips but, on another board someone else had the same problem with hot pink / fuchsia. I am not positive if it was chips, blocks or liquid but others did chime in with similar problems. Maybe a tad of red would be better, that is what I use and never any issues there.HTHs some. Quote Link to comment Share on other sites More sharing options...
hellen Posted June 5, 2008 Share Posted June 5, 2008 I just finished burning a container candle that was originally orange all over however it ended up with a top that was caramel after I had initially burned it. It stayed that way til the bietter end. Just turned caramel where the melt pool was.I thought it was how the heat of burning had effected the original colour? Perhaps that's what is happening to you? Quote Link to comment Share on other sites More sharing options...
cybersix Posted June 5, 2008 Share Posted June 5, 2008 just my two cents but I believe it's the fuchsia dye.I have one old fuchsia dye block. it seems that most of the dye "migrated" in some spots of the block.Also, when I use it to dye wax (until now it was in paraffin) I have the habit to pick a bit of molten wax and put it on a white plate to see the color when it's cooled. Well, I can't see any fuchsia until the wax has fully cooled down. Many times this lead me to add more dye, just to look at my cooled drops on plate and discover the wax was already too colored! Quote Link to comment Share on other sites More sharing options...
Guest LightofDawn Posted June 5, 2008 Share Posted June 5, 2008 Thanks for all the replies, I am relieved that I am not the only one that had this problem with this color. Originally,I was using 2 of the pale pink chips but thought I could cut down the cost a tad and create a slightly darker shade of pink if I used 1/2 of a fuschia chip. Oh well back to plan A or maybe try using just a little red. Quote Link to comment Share on other sites More sharing options...
cybersix Posted June 5, 2008 Share Posted June 5, 2008 I use red to make pale pink, you need just a little pinch! try and see what happens! Quote Link to comment Share on other sites More sharing options...
kandlekrazy Posted June 5, 2008 Share Posted June 5, 2008 It makes me wonder just what causes the fushia to do this? It has to be a blend of pink/purple/red?? All those colors used alone don't do that. Another one of those frustrating candle facts I guess. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.