Ravens Posted August 30, 2009 Share Posted August 30, 2009 I bought KY parasoy for containers and JoyWax. A week ago I melted some Joywax and could hear sizzling sounds as the wax liquified. This afternoon I melted one pound of KY parasoy for containers and it makes the same sound. Any idea why? Could it be water trapped in the wax (hope not!)Within several seconds, the sizzling sounds disappear. Haven't tested yet. Quote Link to comment Share on other sites More sharing options...
NewOrleansLady Posted August 30, 2009 Share Posted August 30, 2009 I used to have that before I changed to my JS5050 waxes. Before I used 4794 and J223. Only thing I could figure was water. But never have I had it with the 5050. Quote Link to comment Share on other sites More sharing options...
islandgirl Posted August 30, 2009 Share Posted August 30, 2009 I had that happen once with C-3. I returned it to the supplier. Your wax is not supposed to sizzle.. I would call the supplier and ask for a replacement.. I am sure the supplier would want to know if the is an issue with their wax.JMHO.... Keep us posted. Quote Link to comment Share on other sites More sharing options...
chuck_35550 Posted August 31, 2009 Share Posted August 31, 2009 At the factory, while the wax is being processed, it is poured into slab trays. These trays have a water-filled cooling tube surrounding it. Sometimes these lines break and water may drip into the tray. This does not harm the wax, but you do need to drain it out. If you have melted the wax before noticing the water, the water will always sink to the bottom of your pot. Just don’t pour this small portion of the wax into your candle container. If water does make it into your candle, it will make the wick sputter and pop, and may also create holes inside the candle. That's from Connie's Candles. Its no big whoop. HTH. Quote Link to comment Share on other sites More sharing options...
funkymonkey66 Posted August 31, 2009 Share Posted August 31, 2009 You can use a turkey baster to suck out the water from the bottom of the pot. Quote Link to comment Share on other sites More sharing options...
islandgirl Posted August 31, 2009 Share Posted August 31, 2009 Other than the spitting problem that one time with the C-3, I have never had to suck out or drain my wax.. Does this happen often with paraffin wax?? (I only use soy and very curios now) Quote Link to comment Share on other sites More sharing options...
Sara Posted August 31, 2009 Share Posted August 31, 2009 I was thinking water, too. Could it be condensation of some kind, or could something have dripped on/into it? Quote Link to comment Share on other sites More sharing options...
Bernadette Posted September 1, 2009 Share Posted September 1, 2009 If you melt your wax(any kind)on the stove, leave it there, or just leave your container there, and then fry anything on the next burner without a spatter screen(or perhaps your hubby does it:angry2:) you can get a few drops of grease in your melter without even knowing it. Even one drop will cause sizzling. Ask me how I know.... That's why I have a shop now, devoted to anything with the craft! Quote Link to comment Share on other sites More sharing options...
chuck_35550 Posted September 1, 2009 Share Posted September 1, 2009 Yes its water. This happens in the manufacture of all waxes. I get frying sounds in 6006, clarus 70/30, you name it. If you've ever fried anything and a drop of water goes in the grease or moisture on the chicken begins to evaporate in the boiling hot grease; you get that sizzling popping sound. Don't worry about it. I have cut open wax and had water flood out of the inside. I panicked and called the supplier, who suggested that I take the wax out of the box and let it dry. They did not offer to replace the wax, because this is a fairly common occurrence. Quote Link to comment Share on other sites More sharing options...
Steph in tx Posted September 3, 2009 Share Posted September 3, 2009 I've had water in my wax before (IGI 2281). It was in the slabs in the box. I just took paper towels and dried it off, then melted it, all was fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.