psfponies Posted April 7, 2010 Share Posted April 7, 2010 I was just wondering what methods everyone using when heating their jars. I have tried a heat gun but can seem to get an even heat I end up with wet spots. The last batch I did I put them in the oven on my hold setting (which is 175 degrees) with the door partly open. So far no wet spots. I am not sure at what temp. would be too hot and stress the jars. Next time I am going to test the temp of the jars to see just how hot they get.Kay Quote Link to comment Share on other sites More sharing options...
sudsnwicks Posted April 8, 2010 Share Posted April 8, 2010 I turn my oven on to the lowest setting which is 150. Once the light goes off (meaning it's reached 150), I turn off the oven. Quote Link to comment Share on other sites More sharing options...
jonsie Posted April 8, 2010 Share Posted April 8, 2010 I use a toaster oven on the lowest setting. And I try to pour when the jar is not too hot and can be handled by my bare hands. If it is too hot to the touch, then I find I get frosting when it cools. However, I'm still a newbie and working out the kinks with GW 464 so take this with a grain of salt Quote Link to comment Share on other sites More sharing options...
BeckyW Posted April 8, 2010 Share Posted April 8, 2010 I have never heated my jars except for the time it got really cold in the room I was pouring and I put them near the woodstove while in their boxes. I guess I have never heard of doing this. So not to sound silly but is this after you poured or before you pour...lolDoesnt sound like something I would do as when I pour candles I wouldn't have room in my toaster oven or my oven for the amount I pour at a time. But was just curious what made you decide to do this. Quote Link to comment Share on other sites More sharing options...
soy327 Posted April 8, 2010 Share Posted April 8, 2010 I heat mine up slightly on my electric radiator heater put a small rack on it wick my jars and set them there until my wax cools before I pour. I only make a few at a time though. Quote Link to comment Share on other sites More sharing options...
Judy, USMC Posted April 8, 2010 Share Posted April 8, 2010 Luckily, I have enough room to have a heat lamp like they use in the restaurant in my pouring area. To help retain the heat I can even leave them in the boxes. Quote Link to comment Share on other sites More sharing options...
BABYFACE CANDLES Posted April 8, 2010 Share Posted April 8, 2010 I use my oven [ 170 degrees ] i leave them on that until the wax is melted and ready to pour then i take them out wick them the buy the time i'm done wicking them the wax is cool enough to pour i have got wet spots but i noticed when i pour slower i don't get them Quote Link to comment Share on other sites More sharing options...
Jane42 Posted April 9, 2010 Share Posted April 9, 2010 We have a turkey fryer that we can fit enough jars and our pour pot in. Since we pour in the basement, it is pretty cold and the jars ended up looking nasty if they weren't warmed.If we needed to pick up the pace and pour more than that at a time, we may have to look into pouring in a warmer area.The other problem I see is that when we pick up our jars from the manufacturer, they have a film on them and we have to wash them all. We tried just wiping with a baby wipe, but you pretty much have to wipe the whole thing down - outside so the name/logo label will stick, outside bottom sothe warning label will stick, inside bottom so the wick stickums will stick and the upper inside so there is not a foggy look to it after the pour.Two big problems if we ever get "big"!!! lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.