Trussell76 Posted April 3, 2011 Share Posted April 3, 2011 Hello,This is batch # 2, I pulled these loafs from the molds after 24 hours, and they had this splotchy chalky patterns through out ... not just on the tops, kind of all over at random.. I have attached Pics. Is this the "ash" that everyone is talking about, or something else?Can I still use the soap? And what can I do to avoid this?Oils were: avacado oil, palm oil, coconut oil, shea butter, cocoa butterEO: spearmint/ OrangeNO ColorantsThanks for the help!Tait Quote Link to comment Share on other sites More sharing options...
TexasBrat Posted April 3, 2011 Share Posted April 3, 2011 Looks like ash to me. You can buff it out with nylon stockings or don't worry about it at all. It is perfectly useable but it's always uncool to get ash. Once you cut the soap you might get ash on the parts that weren't exposed before. Quote Link to comment Share on other sites More sharing options...
Trussell76 Posted April 3, 2011 Author Share Posted April 3, 2011 When would you recomend buffing it? as a log or after cutting into bars?ThanksTait Quote Link to comment Share on other sites More sharing options...
TexasBrat Posted April 3, 2011 Share Posted April 3, 2011 I would cut the bars and see if they get ash first and if/when they do then buff the bars. Quote Link to comment Share on other sites More sharing options...
Kitn Posted April 4, 2011 Share Posted April 4, 2011 You can wash it off too if it bothers you. I embrace it cause I cannot control it. Once in awhile I will wash it off. Quote Link to comment Share on other sites More sharing options...
sjconner Posted April 4, 2011 Share Posted April 4, 2011 Is more than just the top layer of the edges chalky and powdery? I get crumbly edges when I soap too cold. Susan Quote Link to comment Share on other sites More sharing options...
Stella1952 Posted April 5, 2011 Share Posted April 5, 2011 Reminds me of ultra-frosted soy tarts... Quote Link to comment Share on other sites More sharing options...
8-GRAN-ONES Posted April 5, 2011 Share Posted April 5, 2011 have you used that eo combination before?i have found that some scents will ash more than others..like others have said, there is not much that can be done about ash.. Quote Link to comment Share on other sites More sharing options...
chuck_35550 Posted April 5, 2011 Share Posted April 5, 2011 Do you use Borax to soften your lye water? Borax will encourage ash (according to some books). Some folks cover their soap with plastic wrap to avoid ash. Use search and look at the ash posts. HTH Steve Quote Link to comment Share on other sites More sharing options...
Trussell76 Posted April 5, 2011 Author Share Posted April 5, 2011 I used Orange 5 fold and Spearmint EO's on this batch, when I cut my samples yesterday, the "ash" was swirled through out the whole bar....is that normal, or is it due to the EO blend? Quote Link to comment Share on other sites More sharing options...
Stella1952 Posted April 5, 2011 Share Posted April 5, 2011 I don't have much soaping experience, but it seems to me the problem is with the EOs and how they reacted with the oils. Quote Link to comment Share on other sites More sharing options...
Trussell76 Posted April 5, 2011 Author Share Posted April 5, 2011 Hello!Ok so here are a couple of pics from my sliced sample bars..is that swirling "Ash" or is it a EO issue? can some one clear this up, It looks kinda cool but I would just like to be clear for future reference!Thanks,Tait Quote Link to comment Share on other sites More sharing options...
Scented Posted April 17, 2011 Share Posted April 17, 2011 I'm tempted to tell you that isn't ash. The ash I'm used to is powdery, not chalky. The chalky stuff is more like a scorching and crumbles. When you put your tongue on it, it bites back. This doesn't look like it's going to do that either. Your palm, was it stir or no stir palm? I'm also not thinking that the orange, (though usually pale orange to yellow in color in EOs) and spearmint (clear in color that I've seen) caused this unless your EOs are cut maybe. I'm wondering if some of this isn't caused by the palm. So what happens when you touch your tongue to your soap? Quote Link to comment Share on other sites More sharing options...
TexasBrat Posted April 17, 2011 Share Posted April 17, 2011 Ya, doesn't look like ash when it has that swirly pattern. I have seen ash just coat the top or side all the way and not have a pattern like that. It could also be the way it is curing. I have had a bar be dark dark brown on the outside and when it is cut it is a lighter color on the inside. Like scented asked, does it zap the tongue? Quote Link to comment Share on other sites More sharing options...
Trussell76 Posted April 17, 2011 Author Share Posted April 17, 2011 no, it doesn't zap at all, tastes like soap haha...I did use palm on this batch, and another batch, but only got this swirl on this one...? Not sure what kind of palm, purchased it from Cibaria in a 7 # container, it is partially solid and partially liquid....maybe it needs to be mixed?Thanks, Quote Link to comment Share on other sites More sharing options...
Scented Posted April 18, 2011 Share Posted April 18, 2011 Well if it isn't completely solid at room temp (not an oven of a room) then it isn't the stirred kind. So I'm going on a limb here and saying it's your palm. Mix it up before you use it again. Quote Link to comment Share on other sites More sharing options...
kssoaper Posted May 4, 2011 Share Posted May 4, 2011 I'm pretty sure it's the palm oil. I've had this happen when I open and use a new bucket that hasn't been stirred (how do you do that when the bucket is full anyway?) My batches always get better as I get deeper into the bucket. Always tell myself I'm going to stir the next bucket! But, once summer gets here and it arrives all nice and melted off the UPS truck that solves the problem. HTH. Quote Link to comment Share on other sites More sharing options...
CareBear Posted May 4, 2011 Share Posted May 4, 2011 What was the total % of your solid at room temp oils? Quote Link to comment Share on other sites More sharing options...
judymoody Posted May 6, 2011 Share Posted May 6, 2011 Were your essential oils mixed in thoroughly? Quote Link to comment Share on other sites More sharing options...
Carrie Posted May 11, 2011 Share Posted May 11, 2011 I get ash on almost all of my soap but only on the surface that is exposed to air while it is gelling (or not)I have never had ash show up on cut surfaces and I've never heard of ash swirled inside the soap.I don't know what it is but I'm fairly certain it isn't ash.I did have a soap that looked similar to that this week. It was lavender eo and it almost looks like it tried to separate in the middle but then that part saponified. The entire batch was lavender colored and the "separated" part is more white/clear. I used it, it bubbles well and my hands didn't dry out after I used it. I don't know what causes it but I don't like it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.