GFT Posted April 19, 2012 Share Posted April 19, 2012 Hi, I'm extremely new to candlemaking and I'm in trouble. Recently I damaged my wife's favorite candle, a 7" diameter x 11" tall, 1" thick walls, wax hurricane with sea shells imbedded in it. I started the fireplace heater one morning and failed to realize that the candle was setting on the hearth in front of it. It melted a V-gap 3" wide at the top down 2/3 of the candle. I saved the wax off the hearth and would like to try to fill the gap with it. I've fabricated a sheet metal form to go around the outside and an insert for the inside. I have a hot plate, double boiler, and thermometer. From what I have researched, I'll need to melt the wax to 190°, pour, and then follow with a water bath. My questions are: a.Will it work? b.Will the hot wax melt into (bond) the existing walls of the candle and/or would it help to drill small holes in the walls to help lock it in? c.I may need to add a small amount of additional wax to what I salvaged, to reach the original height of the candle, so if I'm unable to find some high melting point wax, can I just blend in a regular stick candle or something? Thanks for any tips or advice. Quote Link to comment Share on other sites More sharing options...
robertgibbens Posted April 19, 2012 Share Posted April 19, 2012 You would probably have better luck melting the damaged hurricane down and learning how to make a new one with the previously embedded shells and the old and new wax. I don't think you will be able to match the wax shape or color (older wax will a different color white than the newly melted). Quote Link to comment Share on other sites More sharing options...
GFT Posted April 19, 2012 Author Share Posted April 19, 2012 Thanks for the reply Robert, I don't know what it would turnout like if I did that. Quote Link to comment Share on other sites More sharing options...
EricofAZ Posted April 25, 2012 Share Posted April 25, 2012 I feel for you. I could think of a bunch of things we do as men that we wish we could fix. The beauty of a hurricane is that it is a one of a kind to be cherished. When gone, it is gone.The only way to fix it that I can think of is if you were to perfectly match the mold and the insert, then pour the melted wax into the gap and smooth it out.The better way to fix it would be a very nice replacement candle. A very nice dinner. A box of Hawaiian Host Chocolate Macadamia Nuts. Doing laundry for a week. Vacuuming for a week. Washing her car, maybe even buying a new one for her. A gift certificate to Gadabout. And if those don't fix the broken hurricane, buy a heated jacuzzi. Oh, and get the cat a new toy. Quote Link to comment Share on other sites More sharing options...
debratant Posted April 26, 2012 Share Posted April 26, 2012 LOL...I bet that you got yelled at good too GFT. I'm sorry...I wish I could offer advise. The fact that you are searching fora way to fix her candle...well, that my dear man, is wonderful. My husband would turn it back on me and say I should havenever left the candle NEAR A FIREPLACE and it would all be my fault it melted. So...I give you huge kudos for trying :) Quote Link to comment Share on other sites More sharing options...
Alan Posted April 26, 2012 Share Posted April 26, 2012 Since it is pretty much destroyed anyway, it can't hurt to try fixing it.Let's assume it is uncolored, so you don't need to do anything to match the color.Based on your description, you'll need more than a small amount of wax to add to the wax you salvaged. You'll need about 6.2 lbs. I assumed the cavity inside is 5 inches in diameter and 10 inches deep, from your description.Choose a wax that looks about as opaque as the hurricane is already. I would probably use a wax with a slightly lower melting point than the hurricane is made out of. You can use the salvaged wax to determine the melting point by melting it down, letting it cool, and measuring the temperature that it begins to solidify. This will give you a ballpark melting point. Then choose a supplemental wax with a melting point that is about 10-15F lower.If there wasn't anything embedded in the v-gap section, you won't need the insert. Instead you will just use the sheet metal form that you have fabricated (a mold). Place the hurricane in there. Fill it with your melted wax (now a mixture of the salvaged wax and your supplemental wax). for the pouring temperature, go about 25F higher than the supplemental wax's melting point. This should give you enough time to work with it, without having too much of a melting effect on the pre-existing shell (and now you know why I suggested a lower MP wax).Immediately chill it in a water bath. The area that is missing should solidify the fastest since it is not insulated like the rest of the shell (the shell is an insulator). When it is a little thicker than the pre-existing shell, dump it out.After it cools enough to remove from your sheet metal form, use a heat-gun inside to then remove some excess wax to achieve the desired thickness. I'm thinking there may be some blemishes on the outside too that a small knife and a heat gun will help you with.It sounds like a really fun challenge, and if you pull it off you'll be a hero. If you choose to do it, please post some before and after pics if you can. Good luck! Quote Link to comment Share on other sites More sharing options...
Donita Posted April 26, 2012 Share Posted April 26, 2012 You would probably have better luck melting the damaged hurricane down and learning how to make a new one with the previously embedded shells and the old and new wax. I don't think you will be able to match the wax shape or color (older wax will a different color white than the newly melted).This is what I had to do over the years....even with small damage you have to start over. Sorry ): That's the name of this game.Donita Quote Link to comment Share on other sites More sharing options...
Sharon in KY Posted April 26, 2012 Share Posted April 26, 2012 Allen so nice to see you... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.